利用复单脉冲比的平面阵列雷达群目标检测方法

针对平面阵列雷达群目标检测问题,以矩形阵为例,详细分析方位向和俯仰向复单脉冲比虚部的统计特性;建立平面阵列雷达群目标检测模型,根据恒虚警检测原理推导复单脉冲比虚部的椭圆判决域,并利用复单脉冲比实部辅助判决,综合提出基于复单脉冲比的平面阵列雷达群目标检测算法。针对双目标情形进行仿真实验,结果表明:在较高信噪比、较大角度间隔以及幅度相当且相位差较大的条件下算法能够有效检测群目标。     

基于小波变换与SVM的复杂装备故障诊断研究

针对复杂装备故障信号提取困难、故障诊断精度低的现状,根据小波变换对处理非平稳信号的优越性和支持向量机(SVM)对模式分类的良好性能,提出了一种基于小波变换与SVM的故障诊断模型,并选取配电系统进行故障诊断仿真实验。结果表明该模型能利用少量训练样本完成故障诊断,有效提高装备故障诊断精度。     

基于能力映射的体系网络化建模与分析

从体系所具有的能力出发,准确地描述体系中实体之间的关系,建立体系结构模型是体系设计与分析的基础,也是基于能力的体系规划的关键。首先提出了能力到组分系统的映射规则,然后将所构建的体系二分网络转化为组分系统的加权合作网络,有效描述了体系组分系统间的复杂关系。最后给出了体系组分系统关系价值度量指标,并对网络模型进行社团结构分析,为基于能力的体系规划作了有益尝试。     

雷诺应力模型的初步应用

针对SSG/LRR-ω雷诺应力模型,选取NASA湍流资源网站上的四个典型算例,即湍流平板边界层流动、带凸起管道流动、翼型尾迹区流动和NACA0012不同攻角绕流,开展初步的验证与确认工作,将部分结果和CFL3D进行对比。对于NACA0012翼型绕流,对比雷诺应力模型和SA模型的升力系数,结果表明:在失速攻角附近,雷诺应力模型明显优于SA模型。在此基础上,将该模型应用于DLR-F6翼身组合体的数值模拟,计算得到的机翼表面典型站位压力分布和实验值吻合良好,同时该模型捕捉到翼身交汇位置的小范围分离。     

四元数长方矩阵的同时复对角化

利用四元数矩阵的奇异值分解(SVD),对两个四元数长矩阵给出了其同时复对角化的充要条件,进一步对一个四元数长矩阵集合,针对其同时复对角化问题,给出了一系列充分必要条件.     

变极性等离子弧焊换向过程控制方法研究

通过试验证实了变极性等离子弧焊换向过程中存在电弧电流谐振现象,且不同极性的电流谐振峰值不同,依据电弧理论分析发现换向期间等效电弧电阻是一个时变量。对换向电路建模分析和仿真结果表明,在换向期间系统阻尼比为时变量,调整系统阻尼比是降低电流谐振峰值的有效途径。又根据变结构控制思想提出了新的换向控制方法,并重新设计了换向电路,显著降低了电流谐振峰值,改善了大电流焊接时换向器件的工作状态,为大功率变极性等离子弧焊电源的研制和开发提供了依据。     

基于VFGPIR联合特征的决策级加权融合检测方法

车载前视地表成像雷达(VFGPIR)探测浅埋目标时面临虚警率过高问题,可利用序列图像特征的联合检测解决这一问题.首先利用Fisher鉴别比(FDR)定量评估从单帧和序列图像中提取的单个特征的鉴别能力;然后针对单个最优序列特征无法满足探测指标要求提出一种基于决策级加权融合的多特征联合检测方法;最后利用接收机工作特性(ROC)曲线来验证所提方法的有效性.试验结果表明:序列特征比单帧图像特征具有更好的鉴别能力;所提方法性能优于单个最优序列特征、特征向量和多数票融合准则对应的检测结果,有望满足实际探雷应用需求.     

Directional change‐point detection for process control with multivariate categorical data

Most modern processes involve multiple quality characteristics that are all measured on attribute levels, and their overall quality is determined by these characteristics simultaneously. The characteristic factors usually correlate with each other, making multivariate categorical control techniques a must. We study Phase I analysis of multivariate categorical processes (MCPs) to identify the presence of change‐points in the reference dataset. A directional change‐point detection method based on log‐linear models is proposed. The method exploits directional shift information and integrates MCPs into the unified framework of multivariate binomial and multivariate multinomial distributions. A diagnostic scheme for identifying the change‐point location and the shift direction is also suggested. Numerical simulations are conducted to demonstrate the detection effectiveness and the diagnostic accuracy.© 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

Counterinsurgency force ratio: strategic utility or nominal necessity

As a consequence of intervention in Iraq and Afghanistan, force ratio for counterinsurgency (COIN) has come under increased scrutiny. Reduced to its essence, the issue is simply, ‘How many troops does it take to get the job done?’ This answer has been sought by the US military, academia, and think tanks. There have been numerous responses, culminating in several ‘plug-and-play’ equations for minimum force ratios in COIN operations. Due to the impossibility of determining precisely how many insurgent forces there are, it has become common to base force ratios on the population of the country. In the realm of policy, the question above is posed as, ‘How many of our troops does it take to get the job done?’     

装药长径比对EFP成型作用效果影响分析

针对装药长径比对EFP成型的影响,基于一种球缺型药型罩EFP,利用ANSYS／LS-DYNA仿真软件对其成型过程进行建模仿真,研究EFP成型过程及其各项参数．在该基础上,改变装药高度得到不同的装药长径比数据,并对不同长径比EFP形成过程进行仿真,得到不同装药长径比EFP的速度、速度增长率及炸药能量利用率等数据,为选择最佳装药长径比提供依据．